139
30633
3 Ply CR135 Tan Wedgegrip AS SFMB
international designation:
E24/3 0/N31 TWG SBR AS
This BeltTS belt is specifically constructed for Surface Finishing Machine Belt (SFMB) applications, featuring a 3-ply, highly cross-rigid monofilament carcass that maintains integrity across the width and ensures the belt lays completely flat, eliminating edge curl. The high-friction, positive diamond wedge grip profile is ideal for perforated vacuum sanding systems. The top cover is non-marking and oil-resistant, while the low-friction treated duck bottom fabric ensures smooth operation. This belt is developed specifically for use on machines finishing wood and wood products, providing excellent durability and performance.
Similar products that may interest you:
Construction:
Compound Top Cover
Top Cover Thickness (in)
Top Cover Description
Top Cover Shore
Compound Bottom Cover
Bottom Cover Thickness (in)
Bottom Cover Description
Bottom Cover Shore
Number of Plies
Anti Static
Overall Gauge (in)
Unit Weight- lb/PIW
Material Between Plies
Maximum Width (in)
Temperature Range (°F)- High
Temperature Range (°F)- Low
Tan Nitrile
(4.24 mm) 0.1670 in.
Wedgegrip
45
Treated Duck
(0.00 mm) 0.0000 in.
Bare
N/A
3
Yes
(7.87 mm) 0.3100 in.
0.1208 lbs/PIW
Nitrile
72 in.
212 °F
-6 °F
Misc:
Pulley Diameter, Minimum
Normal Flex
Back Flex
(152.40 mm) 6.0000 in.
(304.80 mm) 12.0000 in.
Bucket Projection, Maximum
Belt Strength:
Pull for 1% Elongation
(24 N/mm) 135 lbs/sq. in.
Splice Instructions:
Foil
Splice Process
Press Temperature (°F)
Press Pressure (psi)
No
Step Cold
300 °F
30 lbs/sq. in.
Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice.
Other:
Cross Rigid
Impression Top
Oil Resistant
Fire Resistant
FDA Approved
Yes
Yes
Yes
No
No
Suggested Fasteners:
