137
10962
3 Ply CR135 GST AS SFMB
international designation:
E24/3 0/N31 ST Gray OSM AS
This BeltTS belt is specially constructed for Surface Finishing Machine Belt (SFMB) applications. It features a high-friction, non-marking, oil-resistant cover, and a low-friction bottom fabric, making it ideal for use on machines finishing wood and composites. Designed for durability and precision, this belt ensures optimal performance in demanding finishing processes.
Similar products that may interest you:
Construction:
Compound Top Cover
Top Cover Thickness (in)
Top Cover Description
Top Cover Shore
Compound Bottom Cover
Bottom Cover Thickness (in)
Bottom Cover Description
Bottom Cover Shore
Number of Plies
Anti Static
Overall Gauge (in)
Unit Weight- lb/PIW
Material Between Plies
Maximum Width (in)
Temperature Range (°F)- High
Temperature Range (°F)- Low
Gray Nitrile
(3.18 mm) 0.1250 in.
Smooth
65
Polyester
(0.00 mm) 0.0000 in.
Bare
N/A
3
No
(6.60 mm) 0.2600 in.
0.1401 lbs/PIW
Nitrile
72 in.
180 °F
20 °F
Misc:
Pulley Diameter, Minimum
Normal Flex
Back Flex
(152.40 mm) 6.0000 in.
(304.80 mm) 12.0000 in.
Bucket Projection, Maximum
Belt Strength:
Pull for 1% Elongation
(24 N/mm) 135 lbs/sq. in.
Splice Instructions:
Foil
Splice Process
Press Temperature (°F)
Press Pressure (psi)
No
Step Cold
300 °F
30 lbs/sq. in.
Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice.
Other:
Cross Rigid
Impression Top
Oil Resistant
Fire Resistant
FDA Approved
Yes
No
Yes
No
No
Suggested Fasteners:
