135
10960
3 Ply CR135 Black RT AS SFMB
international designation:
E24/3 0/N47 RT Black OSM N AS
This BeltTS belt features a special 3-ply, highly cross-rigid construction designed for Surface Finishing Machine Belt (SFMB) applications. It offers a high-friction, non-marking, oil-resistant cover and a low-friction bottom fabric, making it suitable for all sanding systems. Developed for use on machines finishing wood, metal and composites, this belt is designed to lay flat and will not curl at the edges due to its special monofilament carcass. It is also an excellent choice for materials handling, wood products applications and environments requiring a non-marking, oil-resistant belt. Additionally, it performs exceptionally well in folding rail applications in corrugated box plants.
Similar products that may interest you:
Construction:
Compound Top Cover
Top Cover Thickness (in)
Top Cover Description
Top Cover Shore
Compound Bottom Cover
Bottom Cover Thickness (in)
Bottom Cover Description
Bottom Cover Shore
Number of Plies
Anti Static
Overall Gauge (in)
Unit Weight- lb/PIW
Material Between Plies
Maximum Width (in)
Temperature Range (°F)- High
Temperature Range (°F)- Low
Black Nitrile
(4.75 mm) 0.1870 in.
Roughtop
65
Polyester
(0.00 mm) 0.0000 in.
Bare
N/A
3
Yes
(7.87 mm) 0.3100 in.
0.1157 lbs/PIW
Nitrile
72 in.
180 °F
20 °F
Misc:
Pulley Diameter, Minimum
Normal Flex
Back Flex
(152.40 mm) 6.0000 in.
(304.80 mm) 12.0000 in.
Bucket Projection, Maximum
Belt Strength:
Pull for 1% Elongation
(24 N/mm) 135 lbs/sq. in.
Splice Instructions:
Foil
Splice Process
Press Temperature (°F)
Press Pressure (psi)
No
Step Cold
300 °F
30 lbs/sq. in.
Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice.
Other:
Cross Rigid
Impression Top
Oil Resistant
Fire Resistant
FDA Approved
Yes
Yes
Yes
No
No
Suggested Fasteners:
