LVRQ-70
50259
LVRQ-70
international designation:
This extruded-to-width belt, reinforced with aramid cords, offers exceptional strength and flexibility on live roller conveyors. It can be finger spliced endless using Nitta Carryflex tooling. The integral v-guide, covered with nylon fabric, addresses the issue of guide delamination often seen with competing belts, ensuring long-lasting performance.
Similar products that may interest you:
Construction:
Compound Top Cover
Top Cover Color
Top Cover Description
Top Cover Coefficient of Friction
Compound Bottom Cover
Bottom Cover Color
Bottom Cover Description
Bottom Cover Coefficient of Friction (guide)
Bottom Cover Coefficient of Friction (body)
Overall Gauge (body)
Overall Gauge (total)
Unit Weight
Width
Temperature Range - High
Temperature Range - Low
Thermoplastic Polyurethane
Blue
Smooth
0.5000 to 0.6000 (on steel)
Polyamide Fabric and Thermoplastic Urethane
Blue
Integral V-Guide with Polyamide Facing
0.2000 to 0.2500 (on steel)
0.5000 to 0.6000 (on steel)
(4.0000 mm) 0.1575 in.
(9.5000 mm) 0.3740 in.
(4.9000 kg/sq. m.) 1.0036 lbs/sq. ft.
(70.0000 mm) 2.7559 in.
(60 °C) 140 °F
(-10 °C) 14 °F
Misc:
Pulley Diameter, Minimum
Normal Flex
(90.00 mm) 3.5433 in.
Bucket Projection, Maximum
Belt Strength:
Standard Elongation
Tensile Strength
Elongation at Break
0.5%
(700 N/mm) 3997 lbs/PIW
3.5%
Splice Instructions:
Recommended Splice
Finger (10 mm x 200 mm)
Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice.
Other:
Suggested Fasteners:
