LRB-50
50340
LRB-50
international designation:
This extruded-to-width belt, reinforced with aramid cords, offers exceptional strength and flexibility on live roller conveyors and narrow belt sorters. It can be finger spliced endless on customer systems using existing splice tooling, and with new or upgraded tooling, splice cycle times can be reduced to as little as 17.5 minutes.
Similar products that may interest you:
Construction:
Compound Top Cover
Top Cover Color
Top Cover Description
Top Cover Coefficient of Friction
Compound Bottom Cover
Bottom Cover Color
Bottom Cover Description
Bottom Cover Coefficient of Friction
Anti Static
Overall Gauge
Unit Weight
Maximum Width
Temperature Range - High
Temperature Range - Low
Thermoplastic Polyurethane
Orange
Structured Pattern
0.5000 to 0.6000 (on steel)
Polyester Fabric
White/Black
Bare
0.2000 to 0.2500 (on steel)
Yes
(4.5000 mm) 0.1770 in.
(5.4000 kg/sq. m.) 1.1100 lbs/sq. ft.
(45.0000 mm) 0.1570 in.
(60 °C) 140 °F
(-10 °C) 14 °F
Misc:
Pulley Diameter, Minimum
Normal Flex
Reverse Flex
(110.00 mm) 4.3300 in.
(110.00 mm) 4.3300 in.
Bucket Projection, Maximum
Belt Strength:
Tension at 0.5%
Tensile Strength
Elongation at Break
(40 N/mm) 228 lbs/PIW
(500 N/mm) 2855 lbs/PIW
0.5%
Splice Instructions:
Recommended Splice
Finger (10 mm x 200 mm)
Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice.
Other:
Suggested Fasteners:
