LVR-60
50253
LVR-60
international designation:
This extruded-to-width belt, reinforced with aramid cords, provides exceptional strength and flexibility on live roller conveyors and narrow belt sorters. It can be finger spliced endless using Nitta Carryflex tooling, and with a resin pre-setter, splice cycle times can be as short as 17.5 minutes.
Similar products that may interest you:
Construction:
Compound Top Cover
Top Cover Color
Top Cover Description
Top Cover Coefficient of Friction
Compound Bottom Cover
Bottom Cover Color
Bottom Cover Description
Bottom Cover Coefficient of Friction
Anti Static
Overall Gauge
Unit Weight
Maximum Width
Temperature Range - High
Temperature Range - Low
Thermoplastic Polyurethane
Blue
Structured Pattern
0.5000 to 0.6000 (on steel)
Polyamide Fabric
White/Black
Bare
0.2000 to 0.2500 (on steel)
Yes
(4.5000 mm) 0.1770 in.
(5.4000 kg/sq. m.) 1.1100 lbs/sq. ft.
(45.0000 mm) 0.1570 in.
(60 °C) 140 °F
(-10 °C) 14 °F
Misc:
Pulley Diameter, Minimum
Normal Flex
Reverse Flex
(110.00 mm) 4.3300 in.
(110.00 mm) 4.3300 in.
Bucket Projection, Maximum
Belt Strength:
Tension at 0.5%
Tensile Strength
Elongation at Break
(60 N/mm) 342 lbs/PIW
(700 N/mm) 3997 lbs/PIW
3.5%
Splice Instructions:
Recommended Splice
Finger (10 mm x 200 mm)
Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice.
Other:
Suggested Fasteners:
