174
42204
3 Ply 170 White 70A Smooth x Bare G-1/HR/OR
international designation:
TED100/3 HB SMooth
This non-marking BeltTS belt offers high abrasion resistance and is ozone and low-temperature resistant. It is suitable for moderate heat and provides good oil resistance, making it ideal for a variety of demanding applications.
Similar products that may interest you:
Construction:
Compound Top Cover
Top Cover Thickness (in)
Top Cover Description
Top Cover Shore
Compound Bottom Cover
Bottom Cover Thickness (in)
Bottom Cover Description
Bottom Cover Shore
Number of Plies
Anti Static
Overall Gauge (in)
Unit Weight- lb/PIW
Material Between Plies
Maximum Width (in)
Temperature Range (°F)- High
Temperature Range (°F)- Low
White CSM Hypalon
(5.00 mm) 0.1970 in.
Smooth
70A
N/A
(0.00 mm) 0.0000 in.
Bare
N/A
3
No
(9.98 mm) 0.3930 in.
0.1700 lbs/PIW
SBR
65 in.
300 °F
-40 °F
Misc:
Pulley Diameter, Minimum
Normal Flex
Back Flex
(120.65 mm) 4.7500 in.
(146.05 mm) 5.7500 in.
Bucket Projection, Maximum
Belt Strength:
Pull for 1% Elongation
(30 N/mm) 170 lbs/sq. in.
Splice Instructions:
Foil
Splice Process
Press Temperature (°F)
Press Pressure (psi)
No
Step Hot
0 °F
0 lbs/sq. in.
Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice.
Other:
Cross Rigid
Impression Top
Oil Resistant
Fire Resistant
FDA Approved
No
No
Yes
No
No
Suggested Fasteners:
