116J
29382
2 Ply Poly CR57 Petrol Green PVC Jink RT x QW
international designation:
E10/2 0/V37 Green Jink RT x QW NA
This belt features a soft 35 Shore A green PVC wavy rough top cover, making it ideal for incline/decline applications. It is commonly used in distribution centers for sorting, indexing and case taper belts. The wavy design of the PVC top cover helps reduce noise on snub rollers and eliminates vibration or jumping effects from small diameter snub rollers. This belt is perfect for applications where small pulleys are required, such as bottling/filling, packaging, plastics, printing & paper, cellulose, logistics, manufacturing and pharmaceuticals.
Similar products that may interest you:
Construction:
Compound Top Cover
Top Cover Thickness (in)
Top Cover Description
Top Cover Shore
Compound Bottom Cover
Bottom Cover Thickness (in)
Bottom Cover Description
Bottom Cover Shore
Number of Plies
Anti Static
Overall Gauge (in)
Unit Weight- lb/PIW
Material Between Plies
Maximum Width (in)
Temperature Range (°F)- High
Temperature Range (°F)- Low
Green PVC
(3.70 mm) 0.1456 in.
Roughtop
35
Polyester
(0.00 mm) 0.0000 in.
Quiet Weave
N/A
2
Yes
(5.30 mm) 0.2086 in.
0.0750 lbs/PIW
PVC
118 in.
140 °F
-4 °F
Misc:
Pulley Diameter, Minimum
Normal Flex
Back Flex
(59.94 mm) 2.3600 in.
(99.82 mm) 3.9300 in.
Bucket Projection, Maximum
Belt Strength:
Pull for 1% Elongation
(10 N/mm) 57 lbs/sq. in.
Splice Instructions:
Foil
Splice Process
Press Temperature (°F)
Press Pressure (psi)
Yes
Finger
330 °F
25 lbs/sq. in.
Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice.
Other:
Cross Rigid
Impression Top
Oil Resistant
Fire Resistant
FDA Approved
Yes
Yes
No
No
No
Suggested Fasteners:
