116A
10764
2 Ply Poly 86 Blue AS PVC ST x Bare
international designation:
E15/2 0/V20AS Blue PVC x B
The soft 45 durometer top cover makes this belt an excellent choice for steep incline/decline applications. It is commonly used for package handling, small parts conveying and moving plastic containers up inclines. When using this belt, special care should be taken to minimize dust and cleaning should be done with denatured alcohol only. This belt is ideal for compression applications requiring positive product contact. Suitable for industries such as aggregate, agriculture, carton and paper packaging, cellulose, construction, heavy rubber bulk handling, logistics, mining, municipalities, package handling, power generation, roofing, steel, waste & recycling, manufacturing, packaging and printing & paper.
Similar products that may interest you:
Construction:
Compound Top Cover
Top Cover Thickness (in)
Top Cover Description
Top Cover Shore
Compound Bottom Cover
Bottom Cover Thickness (in)
Bottom Cover Description
Bottom Cover Shore
Number of Plies
Anti Static
Overall Gauge (in)
Unit Weight- lb/PIW
Material Between Plies
Maximum Width (in)
Temperature Range (°F)- High
Temperature Range (°F)- Low
Blue PVC
(2.00 mm) 0.0787 in.
Sticky Top
45
Polyester
(0.00 mm) 0.0000 in.
Bare
N/A
2
Yes
(4.00 mm) 0.1575 in.
0.0816 lbs/PIW
PVC
79 in.
176 °F
23 °F
Misc:
Pulley Diameter, Minimum
Normal Flex
Back Flex
(80.01 mm) 3.1500 in.
(99.82 mm) 3.9300 in.
Bucket Projection, Maximum
Belt Strength:
Pull for 1% Elongation
(15 N/mm) 86 lbs/sq. in.
Splice Instructions:
Foil
Splice Process
Press Temperature (°F)
Press Pressure (psi)
Yes
Finger
330 °F
25 lbs/sq. in.
Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice.
Other:
Cross Rigid
Impression Top
Oil Resistant
Fire Resistant
FDA Approved
Yes
No
No
No
No
Suggested Fasteners:
