116B
10870
3 Ply Poly CR125 Grey ST x Bare AS
international designation:
E22/3 0/ASV20 Grey ST
This belt is made from high-grade PVC, offering increased oil resistance and improved abrasion resistance. Its 3-ply monofilament weft carcass construction provides high load-bearing capacity, stable tracking and excellent fastener retention. It is ideal for handling heavy loads and applications where impact and extreme service conditions are common. Commonly used as folding rail belts in corrugated box plants, this belt is also perfect for industries such as plastics, printing & paper, manufacturing and packaging.
Similar products that may interest you:
Construction:
Compound Top Cover
Top Cover Thickness (in)
Top Cover Description
Top Cover Shore
Compound Bottom Cover
Bottom Cover Thickness (in)
Bottom Cover Description
Bottom Cover Shore
Number of Plies
Anti Static
Overall Gauge (in)
Unit Weight- lb/PIW
Material Between Plies
Maximum Width (in)
Temperature Range (°F)- High
Temperature Range (°F)- Low
Grey PVC
(2.00 mm) 0.0787 in.
Sticky Top
45
Polyester
(0.00 mm) 0.0000 in.
Bare
N/A
3
Yes
(4.80 mm) 0.1889 in.
0.0991 lbs/PIW
PVC
92 in.
176 °F
23 °F
Misc:
Pulley Diameter, Minimum
Normal Flex
Back Flex
(119.89 mm) 4.7200 in.
(150.11 mm) 5.9100 in.
Bucket Projection, Maximum
Belt Strength:
Pull for 1% Elongation
(22 N/mm) 125 lbs/sq. in.
Splice Instructions:
Foil
Splice Process
Press Temperature (°F)
Press Pressure (psi)
Yes
Double Finger
330 °F
28 lbs/sq. in.
Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice.
Other:
Cross Rigid
Impression Top
Oil Resistant
Fire Resistant
FDA Approved
Yes
No
Yes
No
No
Suggested Fasteners:
