Similar products that may interest you:
Construction:
Compound Top Cover
Top Cover Thickness (in)
Top Cover Description
Top Cover Shore
Compound Bottom Cover
Bottom Cover Thickness (in)
Bottom Cover Description
Bottom Cover Shore
Number of Plies
Anti Static
Overall Gauge (in)
Unit Weight- lb/PIW
Material Between Plies
Maximum Width (in)
Temperature Range (°F)- High
Temperature Range (°F)- Low
N/A
(0.00 mm) 0.0000 in.
Matte
87 Shore A
N/A
(0.00 mm) 0.0000 in.
Impregnated
N/A
N/A
No
(1.50 mm) 0.0590 in.
0.3200 lbs/PIW
N/A
118 in.
176 °F
14 °F
Misc:
Pulley Diameter, Minimum
Normal Flex
Back Flex
(0.00 mm) 0.0000 in.
(0.00 mm) 0.0000 in.
Bucket Projection, Maximum
Belt Strength:
Pull for 1% Elongation
(14 N/mm) 80 lbs/sq. in.
Splice Instructions:
Foil
Splice Process
Press Temperature (°F)
Press Pressure (psi)
No
N/A
0 °F
0 lbs/sq. in.
Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice.
Other:
Cross Rigid
Impression Top
Oil Resistant
Fire Resistant
FDA Approved
No
No
Yes
Yes
No
Suggested Fasteners:
