74a
10427
2 Ply 220 1/8in x 1/16in FR/SC/MOR
international designation:
Specially compounded to resist the oily effects of grain, this belt is also static conductive and carries the FR designation for flame resistance in above-ground applications. It is designed for use in grain conveyors and elevators, where minimizing static charges is critical. Ideal for industries such as lumber, agriculture, elevator and milling and feed.
Similar products that may interest you:
Construction:
Compound Top Cover
Color
Top Cover Thickness (in)
Top Cover Description
Compound Bottom Cover
Bottom Cover Thickness (in)
Bottom Cover Description
Number of Plies
Overall Gauge (in)
Unit Weight- lb/PIW
Carcass Type
Compound
Temperature Range (°F)- High
Temperature Range (°F)- Low
Black FR-MOR
Black
(3.30 mm) 1/8 in.
Smooth
Black FR-MOR
(1.60 mm) 1/16 in.
Smooth
2
(7.87 mm) 19/64 in.
0.1660 lbs/PIW
Poly/Nylon
Black FR-MOR
225 °F
-25 °F
Misc:
Pulley Diameter, Minimum
Minimum Pulley Diameter - Head @ 80 - 100% Tension
Minimum Pulley Diameter - Head @ 60 - 79% Tension
Minimum Pulley Diameter - Head @ 59% Tension or Below
Minimum Pulley Diameter - Tail
16.00 in.
14.00 in.
10.00 in.
10.00 in.
Bucket Projection, Maximum
Belt Strength:
Tension Rating (PIW)
220 PIW
Splice Instructions:
Splice Step Size
Splice Process
8.00 in.
Step Hot
Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice.
Other:
Static Conducting
Cross Rigid
High Heat
Impression Top
Oil Resistant
Fire Resistant
FDA Approved
Yes
No
No
No
Yes
Yes
No
Suggested Fasteners:
Flexco Plate/Rivet
Flexco Hinged
Alligator Staple
Clipper Lace
Alligator Lace
#140/R5
#375 or 550
N/A
N/A
N/A
