202
29975
ZL Red Natural Rubber Smooth Top x FS
international designation:
Red Natural Rubber x FS
ZipLink is a revolutionary belting design that combines time-tested rubber cover materials with a structured spiral mesh, allowing for easy splicing into a continuous belt without the need for special tools. Its unique construction eliminates points of weakness, as there is no loss of strength at the splice area. With a recommended working tension of 150 lbs./in and minimal stretch in the polyester mesh, ZipLink ensures reliable performance. This belt is stocked at 72" wide and can ship within 3 working days.
Similar products that may interest you:
Construction:
Compound Top Cover
Top Cover Thickness (in)
Top Cover Description
Top Cover Shore
Compound Bottom Cover
Bottom Cover Thickness (in)
Bottom Cover Description
Bottom Cover Shore
Number of Plies
Anti Static
Overall Gauge (in)
Unit Weight- lb/PIW
Material Between Plies
Maximum Width (in)
Temperature Range (°F)- High
Temperature Range (°F)- Low
Red NR
(3.00 mm) 0.1181 in.
Smooth
40
Black NR
(0.00 mm) 0.0000 in.
Friction Surface
N/A
1
No
(5.08 mm) 0.2001 in.
0.1000 lbs/PIW
Spiral Polyester
72 in.
250 °F
0 °F
Misc:
Pulley Diameter, Minimum
Normal Flex
Back Flex
(101.20 mm) 4.0000 in.
(152.40 mm) 6.0000 in.
Bucket Projection, Maximum
Belt Strength:
Pull for 1% Elongation
(26 N/mm) 150 lbs/sq. in.
Splice Instructions:
Foil
Splice Process
Press Temperature (°F)
Press Pressure (psi)
No
N/A
0 °F
0 lbs/sq. in.
Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice.
Other:
Cross Rigid
Impression Top
Oil Resistant
Fire Resistant
FDA Approved
Yes
No
No
No
No
Suggested Fasteners:
