178
49996
4 Ply 170 Grey 50A 3/8in Square x Bare
international designation:
EMPQ CB50 SP110
This non-marking BeltTS belt provides excellent grip and surface calibration accuracy, making it ideal for longer wood finishing machine belts. With a Shore A 50 durometer, it maintains good tack for sheet puller belts and light incline applications, ensuring reliable performance in demanding environments.
Similar products that may interest you:
Construction:
Compound Top Cover
Top Cover Thickness (in)
Top Cover Description
Top Cover Shore
Compound Bottom Cover
Bottom Cover Thickness (in)
Bottom Cover Description
Bottom Cover Shore
Number of Plies
Anti Static
Overall Gauge (in)
Unit Weight- lb/PIW
Material Between Plies
Maximum Width (in)
Temperature Range (°F)- High
Temperature Range (°F)- Low
Grey NR/SBR
(8.03 mm) 0.3160 in
SP110 10mm Square
50A
N/A
(0.00 mm) 0.0000 in.
Bare
N/A
4
No
(13.72 mm) 0.5400 in.
0.2400 lbs/PIW
SBR
65 in.
220 °F
20 °F
Misc:
Pulley Diameter, Minimum
Normal Flex
Back Flex
(152.40 mm) 6.0000 in.
(177.80 mm) 7.0000 in.
Bucket Projection, Maximum
Belt Strength:
Pull for 1% Elongation
(30 N/mm) 170 lbs/sq. in.
Splice Instructions:
Foil
Splice Process
Press Temperature (°F)
Press Pressure (psi)
No
Step Hot
0 °F
0 lbs/sq. in.
Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice.
Other:
Cross Rigid
Impression Top
Oil Resistant
Fire Resistant
FDA Approved
No
Yes
No
No
No
Suggested Fasteners:
