16f
10211
Polyveyor/Kevlar 1.5 CFM Rated #5925-C
international designation:
Designed for use in air gravity conveyors where temperatures exceed the maximum limits for polyester fabrics, this belt offers an economical alternative to ceramic or stainless steel media, withstanding temperatures up to 500 °F (600 °F intermittent).
Similar products that may interest you:
Construction:
Compound Top Cover
Color
Top Cover Thickness (in)
Top Cover Description
Compound Bottom Cover
Bottom Cover Thickness (in)
Bottom Cover Description
Number of Plies
Overall Gauge (in)
Unit Weight- lb/PIW
Carcass Type
Compound
Temperature Range (°F)- High
Temperature Range (°F)- Low
None
Yellow/White
(0.00 mm) 0.00 in.
Calendared
None
(0.00 mm) 0.00 in.
Calendared
1
(7.94 mm) 5/16 in.
0.0600 lbs/PIW
Polyester-Kevlar
None
500 °F
-60 °F
Misc:
Pulley Diameter, Minimum
Minimum Pulley Diameter
0.00 in.
Bucket Projection, Maximum
Belt Strength:
Tension Rating (PIW)
60 PIW
Splice Instructions:
Splice Step
Splice Finger
No
No
Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice.
Other:
Static Conducting
Cross Rigid
High Heat
Impression Top
Oil Resistant
Fire Resistant
FDA Approved
No
No
Yes
No
No
No
No
Suggested Fasteners:
Flexco Plate/Rivet
Flexco Hinged
Alligator Staple
Clipper Lace
Alligator Lace
N/A
N/A
N/A
N/A
N/A
