104AS
10802
2 Ply Poly CR45 White PU Bare x Bare AS FDA
international designation:
E8/2 U0/U0 White AS FDA
This belt meets FDA compliance standards and features a low-friction, anti-static polyester fabric on both the top and bottom sides with a PU center skim. It is an excellent choice for accumulation, diverting, bakeries, material handling, packaging and paper converting applications. Ideal for industries such as material handling, waste & recycling, automotive, bottling, carton and paper packaging and food processing.
Similar products that may interest you:
Construction:
Compound Top Cover
Top Cover Thickness (in)
Top Cover Description
Top Cover Shore
Compound Bottom Cover
Bottom Cover Thickness (in)
Bottom Cover Description
Bottom Cover Shore
Number of Piles
Anti Static
Overall Gauge (in)
Unit Weight- lb/PIW
Material Between Piles
Maximum Width (in)
Temperature Range (°F)- High
Temperature Range (°F)- Low
Polyester
(0.00 mm) 0.0000 in
PU Impregnated
N/A
Polyester
(0.00 mm) 0.0000 in
PU Impregnated
N/A
2
Yes
(1.30 mm) 0.0512 in
0.0239 lbs/PIW
PU
78 in
194 °F
-4 °F
Misc:
Pulley Diameter, Minimum
Normal Flex
Back Flex
(9.91 mm) 0.3900 in
(9.91 mm) 0.3900 in
Bucket Projection, Maximum
Belt Strength:
Pull for 1% Elongation
(8 N/mm) 45 lbs/sq in
Splice Instructions:
Foil
Splice Process
Press Temperature (°F)
Press Pressure (psi)
Yes
Finger
324 °F
21 lbs/sq in
Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice.
Other:
Cross Rigid
Impression Top
Oil Resistant
Fire Resistant
FDA Approved
Yes
No
Yes
No
Yes
Suggested Fasteners:
